#include <SoftwareSerial.h> // Include the SoftwareSerial library
#define ARDUINO_GPS_RX 9
#define ARDUINO_GPS_TX 8
#define GPS_BAUD_RATE 9600
#include <TinyGPS++.h>
SoftwareSerial gpsPort(ARDUINO_GPS_TX, ARDUINO_GPS_RX);

// This is the hardware serial port on pins 0/1.
#define SerialMonitor Serial
TinyGPSPlus gps;

void setup()
{
gpsPort.begin(GPS_BAUD_RATE);
SerialMonitor.begin(9600);
}

void loop()
{
  if (gpsPort.available()) // If GPS data is available
  SerialMonitor.write(gpsPort.read());
      Serial.print("SATS: ");
      Serial.println(gps.satellites.value());
      Serial.print("LAT: ");
      Serial.println(gps.location.lat(), 6);
      Serial.print("LONG: ");
      Serial.println(gps.location.lng(), 6);
      Serial.print("ALT: ");
      Serial.println(gps.altitude.meters());
      Serial.print("SPEED: ");
      Serial.println(gps.speed.mps());
 
      Serial.print("Date: ");
      Serial.print(gps.date.day()); Serial.print("/");
      Serial.print(gps.date.month()); Serial.print("/");
      Serial.println(gps.date.year());
 
      Serial.print("Hour: ");
      Serial.print(gps.time.hour()); Serial.print(":");
      Serial.print(gps.time.minute()); Serial.print(":");
      Serial.println(gps.time.second());
      Serial.println("---------------------------");
      delay(2000);
  
}